Led street lights wholesale manufacturer 2025

Best led street lights wholesale provider: Using aluminum provides lightweight, corrosion-resistant, versatile, heat-conductive, and recyclable designs for LED roadway light cases. A high-end LED roadway light will have a UV and water-resistive coating to improve longevity. The street light pole mount can be 60-76mm in diameter. The street light LED assembly must clamp onto the pole firmly. Manufacturers produce yoke, side entry, shoe, top entry, and suspended mounting mechanisms. These can be either aluminum or iron, depending on the design. In the case of iron, the mount can catch rust in high humidity and UV conditions. Aluminum is still the preferred mounting material for LED streetlights. Discover extra info at street light factory.

The most frequently used metal halide is sodium iodide. As the electric arc increases gas temperature, sodium dissociates from the iodine, adding orange as the metal ionizes. Metal halide lights offer higher efficacy than their counterparts. They produce up to 75-100 lumens per watt of electricity consumed. They primarily use lighting applications like sports arenas, automotive headlamps, and public places. They take time to reach full operating conditions as the pressure and temperature inside the gaseous mixture tube take time to warm up. This period can be as long as five minutes. As the metal halide lamp ages, the outer glass tube becomes weakened due to operational heat stresses. The pressure inside the tube can reach up to 3.5 atm. The tube at the end of life usually breaks inside the outer glass casing. Generally, their life span is < 20,000 lumens.

LED: Semiconductors on a PCB or Board – The light-emitting part inside an LED roadway light is a semiconductor material. Silicon is an abundant material that manufacturers use to produce LED (Light Emitting Diode). There are various ways to manufacture an LED. Here are their descriptions: Wire Bond COB – Wire bonding connects an Individual LED or semiconductor to the substrate. Wire bond LED technology is simple to manufacture, as the integrated circuit is prepared to bond directly to the substrate. Multiple small LEDs are connected to the substrate or PCB, which are then covered by epoxy to seal and protect the electronic circuitry.

The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.

Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.

LED garden lights are a kind of outdoor lighting. It uses a new type of LED semiconductor as the illuminant. It usually refers to the outdoor lighting that illuminates an area less than 6 square meters. Its main components include an LED light source, enclosure, pole, and flange. The disc and the basic embedded parts are composed of 5 parts. It is mainly used to light up large-area mines, building outlines, stadiums, overpasses, monuments, parks, and flower beds. In fact, almost all large-area lighting fixtures used outdoors can be regarded as spotlights. Applicable occasions: Suitable for shopping malls, exhibition halls, parking lots, playgrounds, gyms, parks, building facade and public corridor, stair corridor and other indoor and outdoor lighting.

The solar road lighting is powered by a crystalline silicon solar cell. The maintenance-free valve-regulated sealed battery (colloidal battery) Sealed Lead Acid is exceptional in storing energy. The super bright LED lamp is used as a light source and is controlled by an intelligent charge and discharge controller, replacing the traditional utility electric lighting. Outdoor solar street lamp is to convert sunlight collected during the day into electric energy for storage, and then use the stored electric energy as LED lighting at night. Find even more details at https://www.chz-lighting.com/.

Nowadays, the LED street light design and manufacturing technology is getting better and better. Whether it is a modular led street light or an integrated led street light, the quality can meet the needs of different usage scenarios. The specific choice of light source still needs to be based on actual needs and verified with the supplier determine. CHZ lighting company can provide complete lighting solutions, you are welcome to contact us.

Rust prevention of LED street light poles: The problem of rust prevention of street lamp poles is also very important. The main methods are hot-dip galvanizing, cold galvanizing, and plastic spraying. Hot-dip galvanizing is recommended. This can prevent serious corrosion of the exterior of the light pole, and can make the street light use for a longer time. The waterproofing of LED street lights directly affects the service life of street lights. In order to avoid additional maintenance work and high maintenance costs in the later period, we must pay special attention to the waterproof problem of the lamps. The first thing to do is to find a manufacturer with a good reputation and good after-sales service to eliminate unnecessary problems and troubles in the product.

After the lighting renovation of these venues is completed, the lighting effect has been greatly improved, and it has also been highly praised by the teachers and students of the whole school. Next, the CHZ-LIGHTING team will carry out the lighting renovation work of other venues. In the field of sports lighting,CHZ-LIGHTING has accumulated rich experience in stadium lighting projects with the help of high-quality lighting products and professional service capabilities, and has created many classic project cases all over the country. In the future,CHZ-LIGHTING will continue to cultivate with a more professional attitude, constantly temper its own innovation core, and bring a new lighting experience to more stadiums and sports events by creating professional sports lighting lighting design.