Alloy wheels supplier in China

Quality custom alloy wheels supplier? Due to the current modification of the shops, the original thought that the hub installation of So easy if you do not pay attention to the following installation details, or out of the control: No diameter reducer is installed: the vehicle may have jitters problem during daily running. Dynamic balance weight does not return to zero: when the vehicle is running at high speed, it may shake. No torque plate is used to tighten the hub manually: too loose the hub may be in danger of falling off, too tight may damage the nut/bolt. Tire specifications do not match the hub: tire wear is abnormal, and even the hub can not be installed or there is a rub problem. Discover more information on alloy rims manufacturers.

The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.

One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.

Since pure electric vehicles do not need an engine, the design styles of the front hoods of pure electric vehicles can be diversified, and are generally refined and sharp. The design style of “rocket front” is full of sports, and it is very windy on the road. The functional configuration of pure electric vehicles Its strengths, various types of assisted safe driving, are very popular with novice drivers. Now many first-tier cities are gradually implementing limited numbers and licenses. Many people have money to buy cars, but the number 1 license is hard to get, but the green license is not affected. Electric hybrid models, which are the only choice for car owners in many restricted areas.

Low-pressure casting: It is more advanced compared to gravity casting. Although it is also formed by pouring high-temperature liquid metal into the mold and cooling it, the metal molecular density will be higher with the help of constant pressure and the wheel will have higher strength after forming because of the use of low-pressure nitrogen propulsion to accelerate the filling of the mold. The whole process is mechanized, so the level of craftsmanship is stable. This process is usually used for most of the original matching wheels for vehicles today.Jiangjin Wheel is a professional aluminum alloy wheels suppliers,specialized in low pressure casting wheels.

We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. See even more info on https://www.jjjwheel.com/.